Texas Administrative Code
Title 22 - EXAMINING BOARDS
Part 6 - TEXAS BOARD OF PROFESSIONAL ENGINEERS AND LAND SURVEYORS
Chapter 138 - COMPLIANCE AND PROFESSIONALISM FOR SURVEYORS
Subchapter B - SEALING REQUIREMENTS
Section 138.31 - Seal Specifications
Current through Reg. 49, No. 38; September 20, 2024
(a) Upon issuance of a registration as a registered professional land surveyor, each registration holder is required to obtain a seal under the requirements of § 134.97 of this title (relating to Issuance of Registration).
(b) In accordance with §1071.351(b) of the Surveying Act, physical and electronic seals shall be of the Board-authorized designs illustrated in this section and shall be no larger than two inches. Regardless of seal size the surveyor's name and number must be clearly legible.
(c) All physical seals obtained and used by registration holders must leave a permanent ink image or permanent impression of the seal attached to the surveying work.
(d) All seals obtained and used by registration holders shall contain any legal name, commonly accepted variation of the legal name, or initial combination with the surname as currently listed with the board and in the usual written signature. Nicknames shall not be permitted on a seal in lieu of a legal name or initial combination. The name can be displayed on the seal using all uppercase letters, such as "LESLIE H. DOE" or using the standard combination of upper and lowercase letters, such as "Leslie H. Doe". If after registration, a registration holder legally changes his/her name, the registration holder must have a new seal or seals made showing the new legal name.
(e) Preprinting of blank forms with a surveyor's seal, or the use of decal or other seal replicas is prohibited.
(f) When signing a surveying work, the surveyor may utilize the designation "R.P.L.S." or other terms as described in § 138.1 of this chapter (relating to Registration Holder Designations).
(g) This section does not prevent the reproduction of sealed and signed, original works for distribution.
(h) Upon issuance of a license as a licensed state land surveyor, each license holder is required to obtain an additional seal.
