Texas Administrative Code
Title 19 - EDUCATION
Part 7 - STATE BOARD FOR EDUCATOR CERTIFICATION
Chapter 231 - REQUIREMENTS FOR PUBLIC SCHOOL PERSONNEL ASSIGNMENTS
Subchapter E - GRADES 9-12 ASSIGNMENTS
Division 22 - MANUFACTURING, GRADES 9-12 ASSIGNMENTS
Section 231.521 - Manufacturing, Grades 9-12

Universal Citation: 19 TX Admin Code ยง 231.521

Current through Reg. 49, No. 38; September 20, 2024

(a) An assignment for Diversified Manufacturing I, Diversified Manufacturing II, Manufacturing Engineering Technology I, Metal Fabrication and Machining I, Metal Fabrication and Machining II, Precision Metal Manufacturing I, Precision Metal Manufacturing II, Precision Metal Manufacturing II Lab, Principles of Manufacturing, Grades 9-12, is allowed using one of the following certificates.

(1) Mathematics/Physical Science/Engineering: Grades 6-12.

(2) Mathematics/Physical Science/Engineering: Grades 8-12.

(3) Secondary Industrial Arts (Grades 6-12).

(4) Secondary Industrial Technology (Grades 6-12).

(5) Technology Education: Grades 6-12.

(6) Trade and Industrial Education: Grades 6-12. This assignment requires appropriate work approval.

(7) Trade and Industrial Education: Grades 8-12. This assignment requires appropriate work approval.

(8) Trade and Industrial Workforce Training: Grades 6-12. This assignment requires appropriate work approval.

(9) Vocational Trades and Industry. This assignment requires appropriate work approval.

(b) Subject to the requirements in subsection (c) of this section, an assignment for Practicum in Manufacturing or Extended Practicum in Manufacturing, Grades 9-12, is allowed with one of the following certificates.

(1) Mathematics/Physical Science/Engineering: Grades 6-12.

(2) Mathematics/Physical Science/Engineering: Grades 8-12.

(3) Secondary Industrial Arts (Grades 6-12).

(4) Secondary Industrial Technology (Grades 6-12).

(5) Technology Education: Grades 6-12.

(6) Trade and Industrial Education: Grades 6-12. This assignment requires appropriate work approval.

(7) Trade and Industrial Education: Grades 8-12. This assignment requires appropriate work approval.

(8) Trade and Industrial Workforce Training: Grades 6-12. This assignment requires appropriate work approval.

(9) Vocational Trades and Industry. This assignment requires appropriate work approval.

(10) Agriculture, Food, and Natural Resources: Grades 6-12.

(11) Agricultural Science and Technology: Grades 6-12.

(12) Any vocational agriculture certificate.

(c) The school district is responsible for ensuring that each teacher assigned to Practicum in Manufacturing or Extended Practicum in Manufacturing, Grades 9-12, has completed appropriate training in state and federal requirements regarding work-based learning and safety.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.