Texas Administrative Code
Title 19 - EDUCATION
Part 7 - STATE BOARD FOR EDUCATOR CERTIFICATION
Chapter 231 - REQUIREMENTS FOR PUBLIC SCHOOL PERSONNEL ASSIGNMENTS
Subchapter E - GRADES 9-12 ASSIGNMENTS
Division 12 - ARTS, AUDIO/VIDEO TECHNOLOGY, AND COMMUNICATIONS, GRADES 9-12 ASSIGNMENTS
Section 231.341 - Printing and Imaging Technology, Grades 9-12

Universal Citation: 19 TX Admin Code § 231.341

Current through Reg. 49, No. 38; September 20, 2024

(a) An assignment for Printing and Imaging Technology I, Printing and Imaging Technology I Lab, Printing and Imaging Technology II, or Printing and Imaging Technology II Lab, Grades 9-12, is allowed with one of the following certificates.

(1) Trade and Industrial Education: Grades 6-12. This assignment requires appropriate work approval.

(2) Trade and Industrial Education: Grades 8-12. This assignment requires appropriate work approval.

(3) Trade and Industrial Workforce Training: Grades 6-12. This assignment requires appropriate work approval.

(4) Vocational Trades and Industry. This assignment requires appropriate work approval.

(5) Technology Applications: Early Childhood-Grade 12.

(6) Technology Applications: Grades 8-12.

(7) Technology Education: Grades 6-12.

(8) Secondary Industrial Arts: Grades 8-12.

(9) Secondary Industrial Technology: Grades 6-12.

(b) Subject to the requirements in subsection (c) of this section, an assignment for Practicum in Printing and Imaging Technology or Extended Practicum in Printing and Imaging Technology, Grades 9-12, is allowed with one of the following certificates.

(1) Trade and Industrial Education: Grades 6-12. This assignment requires appropriate work approval.

(2) Trade and Industrial Education: Grades 8-12. This assignment requires appropriate work approval.

(3) Trade and Industrial Workforce Training: Grades 6-12. This assignment requires appropriate work approval.

(4) Vocational Trades and Industry. This assignment requires appropriate work approval.

(5) Technology Applications: Early Childhood-Grade 12.

(6) Technology Applications: Grades 8-12.

(7) Technology Education: Grades 6-12.

(8) Secondary Industrial Arts: Grades 8-12.

(9) Secondary Industrial Technology: Grades 6-12.

(c) The school district is responsible for ensuring that each teacher assigned to Practicum in Printing and Imaging Technology or Extended Practicum in Printing and Imaging Technology, Grades 9-12, has completed appropriate training in state and federal requirements regarding work-based learning and safety.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.