Texas Administrative Code
Title 19 - EDUCATION
Part 2 - TEXAS EDUCATION AGENCY
Chapter 127 - TEXAS ESSENTIAL KNOWLEDGE AND SKILLS FOR CAREER DEVELOPMENT AND CAREER AND TECHNICAL EDUCATION
Subchapter O - SCIENCE, TECHNOLOGY, ENGINEERING, AND MATHEMATICS
Section 127.782 - Engineering Science (One Credit), Adopted 2021

Universal Citation: 19 TX Admin Code § 127.782

Current through Reg. 49, No. 38; September 20, 2024

(a) Implementation. The provisions of this section shall be implemented by school districts beginning with the 2022-2023 school year.

(1) No later than August 31, 2022, the commissioner of education shall determine whether instructional materials funding has been made available to Texas public schools for materials that cover the essential knowledge and skills identified in this section.

(2) If the commissioner makes the determination that instructional materials funding has been made available, this section shall be implemented beginning with the 2022-2023 school year and apply to the 2022-2023 and subsequent school years.

(3) If the commissioner does not make the determination that instructional materials funding has been made available under this subsection, the commissioner shall determine no later than August 31 of each subsequent school year whether instructional materials funding has been made available. If the commissioner determines that instructional materials funding has been made available, the commissioner shall notify the State Board of Education and school districts that this section shall be implemented for the following school year.

(b) General requirements. This course is recommended for students in Grades 10-12. Prerequisites: Algebra I, one credit in biology, and at least one credit in a course from the science, technology, engineering, and mathematics career cluster. Recommended prerequisites: Geometry, Integrated Physics and Chemistry (IPC), one credit in chemistry, or one credit in physics. This course satisfies a high school science graduation requirement. Students shall be awarded one credit for successful completion of this course.

(1) Career and technical education instruction provides content aligned with challenging academic standards, industry-relevant technical knowledge, and college and career readiness skills for students to further their education and succeed in current and emerging professions.

(2) The Science, Technology, Engineering, and Mathematics (STEM) Career Cluster focuses on planning, managing, and providing scientific research and professional and technical services, including laboratory and testing services, and research and development services.

(3) Engineering Science is an engineering course designed to expose students to some of the major concepts and technologies that they will encounter in a postsecondary program of study in any engineering domain. Students will have an opportunity to investigate engineering and high-tech careers. In Engineering Science, students will employ science, technology, engineering, and mathematical concepts in the solution of real-world challenge situations. Students will develop problem-solving skills and apply their knowledge of research and design to create solutions to various challenges. Students will also learn how to document their work and communicate their solutions to their peers and members of the professional community.

(4) Science, as defined by the National Academy of Sciences, is the "use of evidence to construct testable explanations and predictions of natural phenomena, as well as the knowledge generated through this process." This vast body of changing and increasing knowledge is described by physical, mathematical, and conceptual models. Students should know that some questions are outside the realm of science because they deal with phenomena that are not currently scientifically testable.

(5) Students are expected to know that:

(A) hypotheses are tentative and testable statements that must be capable of being supported or not supported by observational evidence. Hypotheses of durable explanatory power that have been tested over a wide variety of conditions are incorporated into theories; and

(B) scientific theories are based on natural and physical phenomena and are capable of being tested by multiple independent researchers. Unlike hypotheses, scientific theories are well established and highly reliable explanations, but they may be subject to change as new areas of science and new technologies are developed.

(6) Scientific inquiry is the planned and deliberate investigation of the natural world using scientific and engineering practices. Scientific methods of investigation are descriptive, comparative, or experimental. The method chosen should be appropriate to the question being asked. Student learning for different types of investigations include descriptive investigations, which involve collecting data and recording observations without making comparisons; comparative investigations, which involve collecting data with variables that are manipulated to compare results; and experimental investigations, which involve processes similar to comparative investigations but in which a control is identified.

(A) Scientific practices. Students should be able to ask questions, plan and conduct investigations to answer questions, and explain phenomena using appropriate tools and models.

(B) Engineering practices. Students should be able to identify problems and design solutions using appropriate tools and models.

(7) Scientific decision making is a way of answering questions about the natural world involving its own set of ethical standards about how the process of science should be carried out. Students should be able to distinguish between scientific decision-making methods (scientific methods) and ethical and social decisions that involve science (the application of scientific information).

(8) Science consists of recurring themes and making connections between overarching concepts. Recurring themes include systems, models, and patterns. All systems have basic properties that can be described in space, time, energy, and matter. Change and constancy occur in systems as patterns and can be observed, measured, and modeled. These patterns help to make predictions that can be scientifically tested, while models allow for boundary specification and provide a tool for understanding the ideas presented. Students should analyze a system in terms of its components and how these components relate to each other, to the whole, and to the external environment.

(9) Students are encouraged to participate in extended learning experiences such as career and technical student organizations and other leadership or extracurricular organizations.

(10) Statements that contain the word "including" reference content that must be mastered, while those containing the phrase "such as" are intended as possible illustrative examples.

(d) Knowledge and skills.

(1) The student demonstrates professional standards/employability skills as required by business and industry. The student is expected to:

(A) demonstrate knowledge of how to dress appropriately, speak politely, and conduct oneself in a manner appropriate for the profession;

(B) show the ability to cooperate, contribute, and collaborate as a member of a group in an effort to achieve a positive collective outcome;

(D) demonstrate time-management skills in prioritizing tasks, following schedules, and performing goal-relevant activities in a way that produces efficient results; and

(E) demonstrate punctuality, dependability, reliability, and responsibility in performing assigned tasks as directed.

(2) The student, for at least 40% of instructional time, asks questions, identifies problems, and plans and safely conducts classroom, laboratory, and field investigations to answer questions, explain phenomena, or design solutions using appropriate tools and models. The student is expected to:

(A) ask questions and define problems based on observations or information from text, phenomena, models, or investigations;

(B) apply scientific practices to plan and conduct descriptive, comparative, and experimental investigations and use engineering practices to design solutions to problems;

(C) use appropriate safety equipment and practices during laboratory, classroom, and field investigations as outlined in Texas Education Agency-approved safety standards;

(D) use appropriate tools such as dial caliper, micrometer, protractor, compass, scale rulers, multimeter, and circuit components;

(E) collect quantitative data using the International System of Units (SI) and United States customary units and qualitative data as evidence;

(F) organize quantitative and qualitative data using spreadsheets, engineering notebooks, graphs, and charts;

(G) develop and use models to represent phenomena, systems, processes, or solutions to engineering problems; and

(H) distinguish between scientific hypotheses, theories, and laws.

(3) The student analyzes and interprets data to derive meaning, identify features and patterns, and discover relationships or correlations to develop evidence-based arguments or evaluate designs. The student is expected to:

(A) identify advantages and limitations of models such as their size, scale, properties, and materials;

(B) analyze data by identifying significant statistical features, patterns, sources of error, and limitations;

(D) evaluate experimental and engineering designs.

(4) The student develops evidence-based explanations and communicates findings, conclusions, and proposed solutions. The student is expected to:

(A) develop explanations and propose solutions supported by data and models and consistent with scientific ideas, principles, and theories;

(B) communicate explanations and solutions individually and collaboratively in a variety of settings and formats; and

(5) The student knows the contributions of scientists and engineers and recognizes the importance of scientific research and innovation on society. The student is expected to:

(A) analyze, evaluate, and critique scientific explanations and solutions by using empirical evidence, logical reasoning, and experimental and observational testing so as to encourage critical thinking by the student;

(B) relate the impact of past and current research on scientific thought and society, including research methodology, cost-benefit analysis, and contributions of diverse scientists and engineers as related to the content; and

(C) research and explore resources such as museums, libraries, professional organizations, private companies, online platforms, and mentors employed in a STEM field.

(6) The student investigates engineering-related fields and career opportunities. The student is expected to:

(A) differentiate between engineering and engineering technology;

(B) compare the roles or job descriptions for career opportunities in the fields of pure science, engineering, and engineering technology;

(D) demonstrate appropriate oral, written, and visual forms of technical communication.

(7) The student demonstrates an understanding of design problems and works individually and as a member of a team to solve design problems. The student is expected to:

(A) solve design problems individually and in a team;

(B) create solutions to existing problems using a design process;

(D) use communication to achieve a desired goal within a team; and

(E) work as a member of a team to conduct research to develop a knowledge base, stimulate creative ideas, and make informed decisions.

(8) The student understands mechanisms, including simple and compound machines, and performs calculations related to mechanical advantage, drive ratios, work, and power. The student is expected to:

(A) explain the purpose and operation of components, including gears, sprockets, pulley systems, and simple machines;

(B) explain how components, including gears, sprockets, pulley systems, and simple machines, make up mechanisms;

(D) measure forces and distances related to a mechanism;

(E) calculate work and power in mechanical systems;

(F) determine experimentally the efficiency of mechanical systems; and

(G) calculate mechanical advantage and drive ratios of mechanisms.

(9) The student understands energy sources, energy conversion, and circuits and performs calculations related to work and power. The student is expected to:

(A) identify and categorize energy sources as nonrenewable, renewable, or inexhaustible;

(B) define and calculate work and power in electrical systems;

(D) define voltage, current, and resistance and calculate each quantity in series, parallel, and combination electrical circuits using Ohm's law.

(10) The student understands system energy requirements and how energy sources can be combined to convert energy into useful forms. The student understands the relationships between material conductivity, resistance, and geometry in order to calculate energy transfer and determine power loss and efficiency. The student is expected to:

(A) explain the purpose of energy management;

(B) evaluate system energy requirements in order to select the proper energy source;

(D) describe how hydrogen fuel cells create electricity and heat and how solar cells create electricity;

(E) measure and analyze how thermal energy is transferred via convection, conduction, and radiation;

(F) analyze how thermal energy transfer is affected by conduction, thermal resistance values, convection, and radiation; and

(G) calculate resistance, efficiency, and power transfer in power transmission and distribution applications for various material properties.

(11) The student understands the interaction of forces acting on a body and performs calculations related to structural design. The student is expected to:

(A) illustrate, calculate, and experimentally measure all forces acting upon a given body;

(B) locate the centroid of structural members mathematically or experimentally;

(D) define and calculate static equilibrium;

(E) differentiate between scalar and vector quantities;

(F) identify properties of a vector, including magnitude and direction;

(G) calculate the X and Y components given a vector;

(H) calculate moment forces given a specified axis;

(I) calculate unknown forces using equations of equilibrium; and

(J) calculate external and internal forces in a statically determinate truss using translational and rotational equilibrium equations.

(12) The student understands material properties and the importance of choosing appropriate materials for design. The student is expected to:

(A) conduct investigative non-destructive material property tests on selected common household products;

(B) calculate and measure the weight, volume, mass, density, and surface area of selected common household products; and

(13) The student uses material testing to determine a product's function and performance. The student is expected to:

(A) use a design process and mathematical formulas to solve and document design problems;

(B) obtain measurements of material samples such as length, width, height, and mass;

(D) identify and calculate test sample material properties using a stress-strain curve; and

(E) identify and compare measurements and calculations of sample material properties such as elastic range, proportional limit, modulus of elasticity, elastic limit, resilience, yield point, plastic deformation, ultimate strength, failure, and ductility using stress-strain data points.

(14) The student understands that control systems are designed to provide consentient process control and reliability and uses computer software to create flowcharts and control system operating programs. The student is expected to:

(A) create detailed flowcharts using a computer software application;

(B) create control system operating programs using computer software;

(D) select appropriate input and output devices based on the need of a technological system; and

(E) judge between open- and closed-loop systems in order to select the most appropriate system for a given technological problem.

(15) The student demonstrates an understanding of fluid power systems and calculates values in a variety of systems. The student is expected to:

(A) identify and explain basic components and functions of fluid power devices;

(B) differentiate between pneumatic and hydraulic systems and between hydrodynamic and hydrostatic systems;

(D) distinguish between gauge pressure and absolute pressure and between temperature and absolute temperature;

(E) calculate values in a pneumatic system using the ideal gas laws; and

(F) calculate and experiment with flow rate, flow velocity, and mechanical advantage in a hydraulic system model.

(16) The student demonstrates an understanding of statistics and applies the concepts to real-world engineering design problems. The student is expected to:

(A) calculate and test the theoretical probability that an event will occur;

(B) calculate the experimental frequency distribution of an event occurring;

(D) apply AND, OR, and NOT logic to solve complex probability scenarios;

(E) apply Bayes's theorem to calculate the probability of multiple events occurring;

(F) calculate the central tendencies of a data array, including mean, median, and mode;

(G) calculate data variations, including range, standard deviation, and variance; and

(H) create and explain a histogram to illustrate frequency distribution.

(17) The student demonstrates an understanding of kinematics in one and two dimensions and applies the concepts to real-world engineering design problems. The student is expected to:

(A) calculate distance, displacement, speed, velocity, and acceleration from data;

(B) calculate experimentally the acceleration due to gravity given data from a free-fall device;

(D) determine and test the angle needed to launch a projectile a specific range given the projectile's initial velocity.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.