Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 4 - TEXAS DEPARTMENT OF LICENSING AND REGULATION
Chapter 85 - VEHICLE STORAGE FACILITIES
Section 85.1000 - Technical Requirements - Facility Fencing Requirements
Universal Citation: 16 TX Admin Code § 85.1000
Current through Reg. 50, No. 13; March 28, 2025
Enclosure and security of stored vehicles.
(1) Fencing. If not enclosed by a five-foot high fence on or before September 1, 1985, all VSFs shall be completely enclosed by a fence at least six feet high with a gate, which is locked at all times when the licensee or an agent or employee is not at the storage lot. No two VSFs may operate within the same fenced area.
(2) Security of vehicles.
(A) No vehicle may be stored or kept at any licensed VSF unless it is kept inside the fenced or enclosed area at all times. For purposes of this subparagraph, the term "enclosed" shall mean inside a building.
(B) A vehicle accepted for storage in a VSF must be secured to prevent theft of the vehicle or its contents, including but not limited to locking doors, closing windows and hatchbacks, and raising or covering convertible tops.
Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
