Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 4 - TEXAS DEPARTMENT OF LICENSING AND REGULATION
Chapter 83 - BARBERS AND COSMETOLOGISTS
Section 83.107 - Health and Safety Standards-Electric Drill Bits

Universal Citation: 16 TX Admin Code § 83.107

Current through Reg. 50, No. 13; March 28, 2025

(a) Only electric files, drills, or machines specifically designed and manufactured for use in the professional nail industry may be used in any establishment or school for performing manicure or pedicure services. Craft, hardware, and hobby tools cannot be used under any circumstances.

(b) After each use, diamond, carbide, natural and metal bits must be cleaned by either

(1) using a brush;

(2) using an ultrasonic cleaner; or

(3) immersing the bit in acetone for 5 to 10 minutes.

(c) Immediately after cleaning all visible debris, diamond, carbide, natural and metal bits must be disinfected by complete immersion in an appropriate disinfectant between clients, then sterilized in accordance with this chapter.

(d) Buffing bits and chamois must be cleaned with soap and water at the end of every day of use in addition to being cleaned or replaced between clients.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.