Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 4 - TEXAS DEPARTMENT OF LICENSING AND REGULATION
Chapter 83 - BARBERS AND COSMETOLOGISTS
Section 83.103 - Health and Safety Standards-Hair Cutting, Styling, Shaving, and Treatment Services

Universal Citation: 16 TX Admin Code § 83.103

Current through Reg. 50, No. 13; March 28, 2025

(a) Practitioners must wash their hands with soap and water, or use a liquid hand sanitizer, prior to performing any services on a client.

(b) All equipment, implements, tools and materials must be properly cleaned and disinfected in accordance with this rule prior to servicing each client.

(c) After each client, all non-single-use implements must be wiped with a clean paper or fabric towel and sprayed with either an EPA-registered bactericidal, fungicidal, and virucidal disinfectant, or a high-level disinfectant chlorine bleach solution. Equipment, implements, tools and materials to be cleaned and disinfected include but are not limited to combs and picks, haircutting shears, thinning shears/texturizers, razors, safety razors, edgers, guards, clippers, and perm rods.

(d) At the end of each day of use, the above items, along with any other tools, such as sectioning clips, brushes, combs and picks must be cleaned by manually scrubbing with soap and water or adequate methods, and then disinfected by one of the following methods:

(1) Complete immersion in an EPA-registered bactericidal, fungicidal, and virucidal disinfectant in accordance with manufacturer's instructions; or

(2) Complete immersion in a high-level disinfectant chlorine bleach solution.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.