Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 4 - TEXAS DEPARTMENT OF LICENSING AND REGULATION
Chapter 76 - WATER WELL DRILLERS AND WATER WELL PUMP INSTALLERS
Section 76.74 - Responsibilities of the Licensee - Marking Vehicles and Equipment

Universal Citation: 16 TX Admin Code ยง 76.74

Current through Reg. 49, No. 12; March 22, 2024

Licensees shall mark their well rigs and pump installer vehicles used by them or their employees in the well drilling or pump installer business with legible and plainly visible identification numbers.

(1) The identification number to be used on rigs and vehicles shall be the licensee's license number.

(2) License numbers shall be printed, upon each side of every well rig or pump installer vehicle, not less than two (2) inches high and in a color sufficiently different from the color of the vehicle or equipment so that the license number shall be plainly visible.

(3) A licensee shall have thirty (30) days from the date a license is issued to properly mark all well rigs or pump installer vehicles used by him or his employees as provided in paragraphs (1) and (2).

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.