Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 1 - RAILROAD COMMISSION OF TEXAS
Chapter 9 - LP-GAS SAFETY RULES
Subchapter D - ADOPTION BY REFERENCE OF NFPA 54 (NATIONAL FUEL GAS CODE)
Section 9.308 - Installation of Piping

Universal Citation: 16 TX Admin Code ยง 9.308

Current through Reg. 49, No. 12; March 22, 2024

(a) In addition to the requirements of NFPA 54, Chapter 7, Gas Piping Installation, LP-gas piping shall be installed, altered, repaired, pressure tested, and leakage tested only by persons properly certified by the Commission pursuant to § RSA 9.10 and § RSA 9.13 of this title (relating to Rules Examination, and General Installers and Repairman Exemption, respectively).

(b) Licensees and registrants shall document and retain such documentation of all pressure and leakage tests pursuant to § RSA 9.4 of this title (relating to Records).

(c) When connecting to or supplying a new piping system with corrugated stainless steel tubing (CSST), the licensee or registrant shall verify the system is bonded.

(d) In addition to NFPA 58 §5.11.5, licensees and registrants shall retain written proof regarding any current certifications required by the manufacturer for installation and repair methods for CSST, polyethylene, and polyamide pipe and tubing, including heat-fusion.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.