Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 1 - RAILROAD COMMISSION OF TEXAS
Chapter 9 - LP-GAS SAFETY RULES
Subchapter B - LP-GAS INSTALLATIONS, CONTAINERS, APPURTENANCES, AND EQUIPMENT REQUIREMENTS
Section 9.115 - Examination and Testing of Containers

(a) In order to determine the safety of a container, AFS may require that the licensee or operator of the container submit a copy of the manufacturer's data report on that container. AFS may also require that the container and equipment be examined by a Category A, B, or O licensee, with a comprehensive report on the findings submitted to AFS for its consideration. This subsection may be applied even though an acceptable LPG Form 23 has been received.

(b) Any stationary ASME LP-gas container previously in LP-gas service which has not been subject to continuous LP-gas vapor pressure shall be retested by an authorized Category A, B, or O licensed entity utilizing recognized ASME test methods to determine if the container is safe for LP-gas use in Texas, and the test results shall be submitted to AFS on LPG Form 8.

(c) Any stationary ASME LP-gas container which has been subject to continuous LP-gas vapor pressure is not required to be tested prior to installation, provided the licensee or operator of the container files a completed LPG Form 23 with AFS at the time LPG Form 500 is submitted for any facility requiring submission of a site plan in accordance with § RSA 9.101 of this title (relating to Filings Required for Stationary LP-Gas Installations).

(d) Any stationary ASME LP-gas container brought into Texas from out-of-state and intended for stationary LP-gas installation in Texas at any facility requiring submission of a site plan shall be tested in accordance with subsection (b) of this section prior to review approval being granted by AFS, unless that container is owned by a valid licensee. In this case, AFS may determine that such tests are not necessary upon the receipt of an acceptable LPG Form 23 from the licensee.