Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 1 - RAILROAD COMMISSION OF TEXAS
Chapter 6 - GEOTHERMAL RESOURCES
Subchapter A - SHALLOW CLOSED-LOOP GEOTHERMAL SYSTEMS
Section 6.108 - Pump Installer Requirements

Universal Citation: 16 TX Admin Code § 6.108

Current through Reg. 50, No. 13; March 28, 2025

The pump installer shall:

(1) verify all owner information prior to installing any components of a shallow closed-loop geothermal system;

(2) verify that all the pumps, tubing, and connections from the well to the infrastructure and the geothermal heat exchange system are installed, tested, and backfilled in a manner that is consistent with this subchapter and any other applicable local, state, or federal guidelines, regulations, and ordinances;

(3) install all subsurface infrastructure such as loops or tubing; and

(4) comply with all other applicable state regulations, statutes, and local ordinances.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.