Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 1 - RAILROAD COMMISSION OF TEXAS
Chapter 4 - ENVIRONMENTAL PROTECTION
Subchapter B - COMMERCIAL RECYCLING
Division 2 - REQUIREMENTS FOR ON-LEASE COMMERCIAL SOLID OIL AND GAS WASTE RECYCLING
Section 4.215 - Minimum Operating Information

Universal Citation: 16 TX Admin Code § 4.215

Current through Reg. 50, No. 13; March 28, 2025

A permit application for on-lease commercial solid oil and gas waste recycling shall include the following operating information:

(1) a list of Commission districts for which the applicant seeks authority for on-lease commercial solid oil and gas waste recycling;

(2) the estimated maximum volume of untreated oil and gas waste and partially treated oil and gas waste to be stored;

(3) the estimated maximum volume and time that the recyclable product will be stored;

(4) a general description of the recycling process to be employed; a flow diagram showing the process and identifying all equipment and chemicals or additives (e.g., asphalt emulsion, quicklime, Portland cement, fly ash, etc.) to be used in the process; and the Material Safety Data Sheets for any chemical or additive;

(5) a description of all inert material (e.g., brick, rock, gravel, caliche) to be stored and used as aggregate in the treatment process; and

(6) a description of any testing to be performed to demonstrate that the proposed processing will result in a recyclable product that meets the engineering and environmental standards for the proposed use.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.