Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 1 - RAILROAD COMMISSION OF TEXAS
Chapter 4 - ENVIRONMENTAL PROTECTION
Subchapter B - COMMERCIAL RECYCLING
Division 2 - REQUIREMENTS FOR ON-LEASE COMMERCIAL SOLID OIL AND GAS WASTE RECYCLING
Section 4.214 - Minimum Design and Construction Information

Universal Citation: 16 TX Admin Code § 4.214

Current through Reg. 50, No. 13; March 28, 2025

A permit application for on-lease commercial solid oil and gas waste recycling shall include:

(1) a facility diagram of receiving, processing, and storage areas and all equipment (e.g., pug mill), tanks, silos, and dikes.

(2) a description of the type and thickness of liners (e.g., fiberglass, steel concrete), if any, for all tanks, silos, pits, and storage areas/cells;

(3) a map view and two perpendicular cross-sectional views of typical pits and/or storage areas/cells to be constructed, showing the bottom, sides, and dikes, showing the dimensions of each; and

(4) a plan to control and manage stormwater runoff and to retain wastes during wet weather, including the location and dimensions of dikes and/or storage basins that would collect, at a minimum, stormwater during a 25-year, 24-hour rainfall event, and all calculations made to determine the required capacity and design.

Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.