Texas Administrative Code
Title 16 - ECONOMIC REGULATION
Part 1 - RAILROAD COMMISSION OF TEXAS
Chapter 14 - REGULATIONS FOR LIQUEFIED NATURAL GAS (LNG)
Subchapter B - GENERAL RULES FOR ALL STATIONARY LNG INSTALLATIONS
Section 14.2119 - Transport Vehicle Loading and Unloading Facilities and Procedures
Universal Citation: 16 TX Admin Code ยง 14.2119
Current through Reg. 49, No. 12; March 22, 2024
In addition to NFPA 59A §11.6, transport vehicle loading and unloading facilities shall meet the following requirements:
(1) Transfer piping, pumps, and compressors shall be installed with the following protective measures:
(A) protection from damage from vehicle
movements in compliance with the guardrail and fencing requirements of §
RSA
14.2101 of this title (relating to System
Protection Requirements);
(B)
isolation valves at both ends of containers with less than 2,000 gallon
capacity, and a remote operating valve, automatic closure, or check valve to
prevent backflow on containers of 2,000 gallons or more capacity;
(C) a check valve on piping for liquid
transfer to minimize accidental release; and
(D) a line relief valve between every pair of
isolation valves.
(2) Operating status indicators shall be provided in the transfer area.
Disclaimer: These regulations may not be the most recent version. Texas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
