Texas Administrative Code
Title 1 - ADMINISTRATION
Part 4 - OFFICE OF THE SECRETARY OF STATE
Chapter 93 - TRADEMARKS
Subchapter E - DRAWING
Section 93.51 - Drawing Required

(a) The drawing depicts the mark sought to be registered and will be used to reproduce the mark on the registration certificate. The drawing shall be a substantially exact representation of the mark as actually used on or in connection with the goods and/or services.

(b) The drawing must be clear and legible and presented on white paper, so that a clear electronic image may be made. An electronic reproduction of the mark will suffice as the drawing, as long as it meets the requirements of this section and § RSA 93.52 of this title (relating to Requirements for a Drawing).

(c) The drawing sheet should be no larger than 8 1/2 inches by 11 inches. The actual drawing of the mark must be no larger than 3.15 inches (8 cm) high by 3.15 inches (8 cm) wide.

(d) The drawing must depict only one mark and should be limited to the mark sought to be registered. Matter appearing on the specimens that is not part of the mark should not be placed on the drawing sheet. Purely informational matter such as package contents, contact information, and organizational identifiers are generally not considered part of the mark.