Rules & Regulations of the State of Tennessee
Title 1220 - Tennessee Public Utility Commission
Subtitle 1220-04 - Division of Public Utilities
Chapter 1220-04-04 - Regulations for Electric Companies
Section 1220-04-04-.32 - PRE-INSTALLATION INSPECTIONS AND TESTS

Universal Citation: TN Comp Rules and Regs 1220-04-04-.32

Current through September 24, 2024

(1) Every meter and/or associated device shall be inspected and tested, either by the utility or the manufacturer, in accordance with the standards contained in American National Standards for Electric Meters - ANSI C.12.1, latest edition, before being placed in service, and the accuracy of each meter shall be certified to be within the tolerances permitted by Rule 1220-4-4-.38. A meter removed from a customer's premises may be returned to service without testing if the type of meter is included in an In-Service performance test program conducted under Rule 1220-4-4-.35, in accordance with American National Standard for Electric Meters - ANSI C.12.1, latest edition and the performance of that type meter in such program is acceptable.

Authority: T.C.A. § 65-2-102.

Disclaimer: These regulations may not be the most recent version. Tennessee may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.