Rules & Regulations of the State of Tennessee
Title 0400 - Environment and Conservation
Subtitle 0400-45 - Division of Water Resources
Chapter 0400-45-08 - Water Registration Requirements (Transferred from 1200-05-08 which was repealed)
Section 0400-45-08-.09 - POINTS OF WITHDRAWAL AND RETURN LOCATION/SOURCE IDENTIFICATION
Universal Citation: TN Comp Rules and Regs 0400-45-08-.09
Current through September 24, 2024
(1) The point(s) of withdrawal and return shall be located at a minimum using any one of the following methods:
(a) Located on a 7.5 minute USGS topographic
map.
(b) Coordinates obtained with
a GPS unit (in decimal format).
(c)
The name of the stream or river and river mile from the mouth of the river as
shown on a 7.5 minute USGS topographic map.
(d) The name of the municipal or industrial
wastewater plant.
(e) The name of
the source and county where the intake, well or spring is located and the name
of the source or discharge point and county where water is returned. Water
returned through multiple private subsurface disposal systems only have to
identify the county where the discharge takes place.
(2) State Driller Tag Number or other State Identification Number, if one has been assigned or public water system (PWS) entry point ID.
(3) Multiple points of withdrawal may be further identified and designated as W1, W2, W3 and so forth for reporting purposes. Multiple points of return may be further identified as R1, R2, R3, and so forth.
Authority: T.C.A. §§ 69-7-301 et seq., and 4-5-201 et seq.
Disclaimer: These regulations may not be the most recent version. Tennessee may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
