Rules & Regulations of the State of Tennessee
Title 0080 - Department of Agriculture
Subtitle 0080-07 - Forestry
Chapter 0080-07-07 - Native Species Lumber
Section 0080-07-07-.06 - STANDARD LUMBER SIZES
Current through September 24, 2024
(1) The nominal and actual thickness and width of graded lumber is the same as lumber graded according to American Softwood Lumber Standard Table 4.
Table 4 Nominal and Minimum Actual Thickness and Width
Minimum Thickness (inches) |
Minimum Width (inches) |
|||||||||
Surfaced or Sawn-to-Size |
Rough |
Surfaced or Sawn-to-Size |
Rough |
|||||||
Nominal Thickness |
Dry |
Green |
Dry |
Green (suggested) |
Nominal Width |
Dry |
Green |
Dry |
Green (suggested) |
|
2 |
1 1/2 |
1 9/16 |
1 5/8 |
1 11/16 |
2 |
1 1/2 |
1 9/16 |
1 5/8 |
1 11/16 |
|
2 1/2 |
2 |
2 1/16 |
2 1/8 |
2 1/4 |
2 1/2 |
2 |
2 1/16 |
2 1/8 |
2 1/4 |
|
3 |
2 1/2 |
2 9/16 |
2 5/8 |
2 3/4 |
3 |
2 1/2 |
2 9/16 |
2 5/8 |
2 3/4 |
|
3 1/2 |
3 |
3 1/16 |
3 1/8 |
3 1/4 |
3 1/2 |
3 |
3 1/16 |
3 1/8 |
3 1/4 |
|
4 |
3 1/2 |
3 9/16 |
3 5/8 |
3 13/16 |
4 |
3 1/2 |
3 9/16 |
3 5/8 |
3 13/16 |
|
4 1/2 |
4 |
4 1/16 |
4 1/8 |
4 5/16 |
4 1/2 |
4 |
4 1/16 |
4 1/8 |
4 5/16 |
|
5 |
4 1/2 |
4 5/8 |
4 5/8 |
4 13/16 |
||||||
6 |
5 1/2 |
5 5/8 |
5 5/8 |
5 7/8 |
||||||
8 |
7 1/4 |
7 1/2 |
7 3/8 |
7 3/4 |
||||||
10 |
9 1/4 |
9 1/2 |
9 3/8 |
9 3/4 |
||||||
12 |
11 1/4 |
11 1/2 |
11 3/8 |
11 7/8 |
||||||
14 |
13 1/4 |
13 1/2 |
13 3/8 |
13 15/16 |
||||||
16 |
15 1/4 |
15 1/2 |
15 3/8 |
16 |
(2) Lumber shall be six feet and longer and be in two-foot length increments unless the purchase agreement specifically stipulates different lengths.
(3) Lumber should have clean, sound ends but it does not have to be double-end-trimmed to precise length. If not double-end-trimmed, there should be sufficient overlength to allow square end-trimming the lumber to its nominal length.
Authority: T.C.A. §§ 4-3-203 and 43-28-313.