South Dakota Administrative Rules
Title 61 - Department of Public Safety
Article 61:08 - Boilers
Chapter 61:08:06 - Inspections and reports
Section 61:08:06:08 - State serial number

Universal Citation: SD Admin Rules 61:08:06:08
Current through Register Vol. 51, page 70, December 27, 2024

Upon completion of the installation, an internal inspection shall be made of each boiler by an inspector. At the time of the internal or certificate inspection each boiler shall be stamped by the inspector with a serial number of the state of South Dakota. The serial number shall consist of the letters SD followed by numbers as assigned. The State Fire Marshal's Office shall assign a block of numbers to each insurance company supplying boiler insurance and operating in the state of South Dakota.

Each steel or cast iron boiler shall have the state serial number permanently attached.

The ASME number or South Dakota number of a condemned boiler shall be crossed out as follows: XXXXXX.

General Authority: SDCL 34-29A-16.

Law Implemented: SDCL 34-29A-16.

Disclaimer: These regulations may not be the most recent version. South Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.