South Dakota Administrative Rules
Title 61 - Department of Public Safety
Article 61:08 - Boilers
Chapter 61:08:05 - Safety requirements
Section 61:08:05:23 - Safety valve repair
Universal Citation: SD Admin Rules 61:08:05:23
Current through Register Vol. 51, page 70, December 27, 2024
Repairs or adjustments made to safety or safety relief valves shall be made by the manufacturer of the valve or an ASME approved testing facility equipped to repair the valves. On boilers requiring only a single safety or relief valve, the discharge setting shall not exceed the established maximum allowable working pressure of the boiler. On installations requiring more than one safety or relief valve, the range of safety or relief valve setting shall be in accordance with section I and IV, of the ASME code.
General Authority: SDCL 34-29A-16.
Law Implemented: SDCL 34-29A-24.
Disclaimer: These regulations may not be the most recent version. South Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
