South Dakota Administrative Rules
Title 20 - PUBLIC SAFETY
Article 20:01 - COMMERCIAL INSPECTION AND REGULATION
Chapter 20:01:06 - Weights and measures service agencies
Section 20:01:06:10 - Lead and wire seal requirement
Universal Citation: SD Admin Rules 20:01:06:10
Current through Register Vol. 50, page 114, March 25, 2024
All weighing or measuring equipment placed into service by a service agency shall be sealed with a lead and wire seal or similar device so the equipment cannot be altered without first breaking the seal.
General Authority: SDCL 37-21A-11.
Law Implemented: SDCL 37-21A-2, 37-21A-5 to 37-21A-7.
Disclaimer: These regulations may not be the most recent version. South Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
