South Carolina Code of Regulations
Chapter 8 - BUILDING CODES COUNCIL
Article 6 - MODULAR BUILDING CONSTRUCTION
Section 8-613 - Multiple Site Manufacturing
Universal Citation: SC Code Regs 8-613
Current through Register Vol. 48, 12, December 27, 2024
(1) If a manufacturer plans to produce at more than one (1) location, required plan approval may be obtained for all locations subject to submission of the following:
(a) one (1) set of plan review
application forms for each location; and
(b) one electronic set of plans and
specifications, plus one (1) additional set for each location specifying the
location of manufacture; and
(c)
filing fees as designated in these regulations; and
(d) one (1) electronic quality control manual
for each location of manufacture.
(2) If a manufacturer wishes to obtain approval for one (1) or more points of manufacture, a manufacture's license, and at least one (1) manufacturer's representative license must be issued for each location.
Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
