South Carolina Code of Regulations
Chapter 8 - BUILDING CODES COUNCIL
Article 6 - MODULAR BUILDINGS CONSTRUCTION
Section 8-613 - Multiple Site Manufacturing
Universal Citation: SC Code Regs 8-613
Current through Register Vol. 48, No. 3, March 22, 2024
(1) If a manufacturer plans to produce at more than one (1) location, required plan approval may be obtained for all locations at the time of filing subject to submission of the following:
(a) one (1) set
of application forms for required plan approval designating all locations of
manufacture; and
(b) two (2) sets
of plans and specifications, plus one (1) additional set for each location of
manufacturer; and
(c) filing fees
as designated in these regulations; and
(d) two (2) quality control manuals, plus one
(1) additional manual for each location of manufacture.
(2) If a manufacturer wishes to obtain approval for one (1) or more points of manufacture, a manufacture's license, and at least one (1) manufacturer's representative license must be issued for each location.
Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
