South Carolina Code of Regulations
Chapter 63 - DEPARTMENT OF HIGHWAYS AND PUBLIC TRANSPORTATION
Article 4 - ENGINEERING
Subarticle 4 - MOVEMENT OF ROAD MACHINERY OVER HIGHWAYS
Section 63-361 - Routing Permits

Universal Citation: SC Code Regs 63-361
Current through Register Vol. 48, No. 9, September 27, 2024

All road machinery which is temporarily moved over the highways of this State and which exceeds 12' -0"' in width or which weighs 90,000 pounds or more (including pulling equipment) shall first obtain from the Department a routing permit for the movement which shall specify the routes to be traveled and conditions to be observed during the trip. This permit, which will be issued without charge, shall be carried in the vehicle and be available for inspection at all times. The Department will determine the minimum spacing of axles and the maximum loads to be permitted on single, double and triple tandem axles.

Loads moved in violation of this regulation will be considered in violation of Chapter 5, Title 56, of the Code of Laws of South Carolina and subject to the penalties provided therefor.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.