South Carolina Code of Regulations
Chapter 61 - DEPARTMENT OF HEALTH AND ENVIRONMENTAL CONTROL
Subchapter 61-56 - ONSITE WASTEWATER SYSTEMS
Section 61-56.900 - APPENDIX V - THERMOPLASTIC TANKS STANDARD
Universal Citation: SC Code Regs 61-56.900
Current through Register Vol. 48, No. 9, September 27, 2024
(1) The Department shall approve plans for thermoplastic tanks on an individual basis.
(a) Thermoplastic tanks shall be certified by
an accredited third-party to comply with the most recent edition of IAPMO/ANSI
Z1000 or CSA B66.
(b) The uniform
liquid depth shall be at least three (3) feet.
(c) The inside length of the tank shall be at
least two (2) times the inside width of the tank.
(2) If thermoplastic tanks having other dimensional characteristics are proposed, specifications must be submitted to the Division of Onsite Wastewater Management for approval, and the proposed design must be demonstrated to provide equivalent effectiveness for storage and distribution to that of concrete or thermoplastic tanks described in this regulation.
Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
