South Carolina Code of Regulations
Chapter 61 - DEPARTMENT OF HEALTH AND ENVIRONMENTAL CONTROL
Subchapter 61-107 - Solid Waste Management
Subchapter 61-107.19 - SOLID WASTE. MANAGEMENT: SOLID WASTE LANDFILLS AND STRUCTURAL FILL
Part II - Permit-by-rule: Short Term Structural Fill
Section 61-107.19.II.B - Permit-by-rule Registration Requirements

Universal Citation: SC Code Regs 61-107.19.II.B

Current through Register Vol. 48, No. 9, September 27, 2024

1. Prior to engaging in structural fill activity, the landowner or landowner's agent shall receive written approval from the Department to operate under the Permit-by-rule for a specific site. "Agent" means one that acts for or as a representative of another. To request approval and register a site, a completed registration form provided by the Department and all information required by this Part shall be submitted to the Department. The Department will process the administratively complete registration and notify the owner/agent in writing if the site is approved for structural fill activity under the Permit-by-rule.

2. All required information submitted to the Department shall be complete and accurate. The landowner and agent shall sign the registration form and the following certification: "I certify under penalty of law that I have personally examined and am familiar with the information submitted in the attached document; and, I believe the submitted information is true, accurate, and complete. I am aware that there are significant penalties for submitting false information, including the possibility of fine and imprisonment."

3. To request approval to operate under the Permit-by-rule, three copies of the following documents shall be submitted to the Department:

a. A registration form provided by the Department;

b. A current county map showing the location of the proposed fill area;

c. Proof of ownership or control of the property;

d. Site information to include:
(1) A written description of the location of the area that will accept the fill material including road names/numbers;

(2) The source(s) supplying the fill material;

(3) The anticipated time frame for filling the area;

(4) The size of the area to be filled;

(5) The maximum volume the fill area will be capable of receiving; and,

(6) The latitude and longitude coordinates of the proposed fill area;

e. An explanation of how the waste will be compacted and the cover applied; and,

f. Other pertinent information as deemed appropriate by the Department.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.