South Carolina Code of Regulations
Chapter 49 - DEPARTMENT OF LABOR, LICENSING AND REGULATION- SOUTH CAROLINA STATE BOARD OF REGISTRATION FOR PROFESSIONAL ENGINEERS AND LAND SURVEYORS
Article 4 - STANDARDS OF PRACTICE MANUAL FOR SURVEYING IN SOUTH CAROLINA
Section 49-490 - Instruments and Apparatus

Universal Citation: SC Code Regs 49-490

Current through Register Vol. 47, No. 12, December 22, 2023

A. Surveyor's Instruments: Surveying in South Carolina shall be conducted in the field with properly calibrated equipment appropriate for the tolerance of work being performed. The equipment shall be tested at regular intervals and adjusted to maintain its optimum accuracy.

B. Tapes: All tapes shall be of alloy or carbon steel and shall be certified as USBS quality with a known coefficient of temperature and tension corrections, and graduated in feet and decimal parts of a foot or calibrated to another tape or means that has been certified by the USBS or NGS.

C. Baselines: Baselines have been established by NGS throughout the state for the purpose of calibrating electronic distance measuring devices. Some of these baselines have 100' monuments to calibrate tapes. Surveyors shall utilize these baselines to insure calibration of their electronic measuring equipment and tapes. Calibration records for each instrument and tapes shall be maintained by the Surveyor and shall be made available when required by the Board or the courts.

Amended by State Register Volume 33, Issue No. 6, eff June 26, 2009; State Register Volume 46, Issue No. 05, eff. 5/27/2022.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.