South Carolina Code of Regulations
Chapter 49 - DEPARTMENT OF LABOR, LICENSING AND REGULATION- SOUTH CAROLINA STATE BOARD OF REGISTRATION FOR PROFESSIONAL ENGINEERS AND LAND SURVEYORS
Article 4 - STANDARDS OF PRACTICE MANUAL FOR SURVEYING IN SOUTH CAROLINA
Section 49-450 - Plats and Platting

Universal Citation: SC Code Regs 49-450

Current through Register Vol. 47, No. 12, December 22, 2023

A. A plat, as defined by this manual, is an accurate graphical representation, properly dimensioned, report of a survey made by a Surveyor of a finite piece of real property, including pertinent data and appropriate information.

B. A survey requiring a plat should be accurately presented and should reveal all of the pertinent information developed by the survey.

C. Primary reference materials which provide the basis for the establishment of the survey boundaries shall be listed on the face of the plat.

Amended by State Register Volume 33, Issue No. 6, eff June 26, 2009; State Register Volume 46, Issue No. 05, eff. 5/27/2022.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.