South Carolina Code of Regulations
Chapter 49 - DEPARTMENT OF LABOR, LICENSING AND REGULATION- SOUTH CAROLINA STATE BOARD OF REGISTRATION FOR PROFESSIONAL ENGINEERS AND LAND SURVEYORS
Article 1 - ORGANIZATION, ADMINISTRATION AND PROCEDURE
Section 49-101 - Board Rules of Order/Procedures and Seal of Board
Current through Register Vol. 48, No. 3, March 22, 2024
A. Rules of Order/Procedures. All proceedings of the Board shall be governed by provisions set forth in the Administrative Procedures Act.
B. Description of Seal of Board. The seal of the Board shall be circular in form and 1 7/8 inches in diameter. Concentric with the outside of the Seal there shall be a circle 1 1/4 inches in diameter, within which there shall be a replica of the device used on the Seal of the State of South Carolina, and in the annular space between the circle and the outside of the Seal there shall appear the words "State Board of Registration for Professional Engineers and Surveyors." All official papers, registration certificates, and other formal documents of the Board shall bear the imprint of this Seal.
