South Carolina Code of Regulations
Chapter 38 - DEPARTMENT OF PUBLIC SAFETY
Article 5 - STATE TRANSPORT POLICE REGULATIONS
Subarticle 1 - UNMANUFACTURED FOREST PRODUCTS TRUCKING REGULATIONS
Part 38-393 - PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION
Subpart J - FRAMES, CAB AND BODY COMPONENTS, WHEELS, STEERING, AND SUSPENSION SYSTEMS
Section 38-393.207 - Suspension systems

Universal Citation: SC Code Regs 38-393.207

Current through Register Vol. 48, No. 9, September 27, 2024

(a) Axles. No axle positioning part shall be cracked, broken, loose or missing. All axles must be in proper alignment.

(b) Adjustable axles. Adjustable axle assemblies shall not have locking pins missing or disengaged.

(c) Leaf springs. No leaf spring shall be cracked, broken, or missing nor shifted out of position.

(d) Coil springs. No coil spring shall be cracked or broken.

(e) Torsion bar. No torsion bar or torsion bar suspension shall be cracked or broken.

(f) Air suspensions. The air pressure regulator valve shall not allow air into the suspension system until at least 55 psi is in the braking system. The vehicle shall be level (not tilting to the left or right). Air leakage shall not be greater than 3 psi in a 5 minute time period when the vehicle's air pressure gauge shows normal operating pressure.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.