South Carolina Code of Regulations
Chapter 38 - DEPARTMENT OF PUBLIC SAFETY
Article 5 - STATE TRANSPORT POLICE REGULATIONS
Subarticle 1 - UNMANUFACTURED FOREST PRODUCTS TRUCKING REGULATIONS
Part 38-393 - PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION
Subpart G - MISCELLANEOUS PARTS AND ACCESSORIES
Section 38-393.93 - Seats, seat belt assemblies, and seat belt assembly anchorages

Universal Citation: SC Code Regs 38-393.93

Current through Register Vol. 48, No. 9, September 27, 2024

(a) [Reserved]

(b) Trucks and truck tractors

(1) Trucks and truck tractors manufactured on and after January 1, 1965, and before July 1, 1971. Except as provided in paragraph (d), after June 30, 1972, every truck and truck tractor manufactured on or after January 1,1965, and before July 1, 1971, must be equipped with a Type 1 or Type 2 seat belt assembly that conforms to Federal Motor Vehicle Safety Standard No. 209 (Section 571.209) installed at the driver's seat and at the right front outboard seat, if the vehicle has one, and seat belt assembly anchorages that conform to the location and geometric requirements of Federal Motor Vehicle Safety Standard No. 210 (Section 571.210) for each seat belt assembly that is required by this subparagraph.

(2) Trucks and truck tractors manufactured on or after July 1, 1971. Every truck and truck tractor manufactured on or after July 1, 1971, except a truck or truck tractor being transported in driveaway towaway operation and having an incomplete vehicle seating and cab configuration, must conform to the requirements of Federal Motor Vehicle Safety Standard No. 208\1\ (Section 571.208) (relating to installation of seat belt assemblies) and Federal Motor Vehicle Safety Standard No. 210\1\ (Section 571.210) (relating to installation of seat belt assembly anchorages).\1\See footnote to Regulation 38-393.93(a).

(3) Trucks and truck tractors manufactured on or after January 1, 1972. Every truck and truck tractor manufactured on or after January 1, 1972, except a truck or truck tractor being transported in driveaway towaway operation and having an incomplete vehicle seating and cab configuration, must conform to the requirements of Federal Motor Vehicle Safety Standard No. 207\1\ (Section 571.207) (relating to seating systems).

(c) Effective date of standards. Whenever paragraph (a) or (b) requires conformity to a Federal Motor Vehicle Safety Standard, the vehicle or equipment must conform to the version of the Standard that is in effect on the date the vehicle is manufactured or on the date the vehicle is modified to conform to the requirements of paragraph (a) or (b), whichever is later.

(d) Trucks and truck tractors manufactured on or after January 1, 1965, and before July 1, 1971, and operated in the State of Hawaii, must comply with the provisions of paragraph (b) on and after January 1, 1976.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.