South Carolina Code of Regulations
Chapter 108 - DEPARTMENT OF LABOR, LICENSING AND REGULATION- SOIL CLASSIFIERS ADVISORY COUNCIL
Section 108-3 - Seals

Universal Citation: SC Code Regs 108-3

Current through Register Vol. 47, No. 12, December 22, 2023

A. A professional soil classifier shall not affix, or permit to be affixed, his/her name or seal to any document which was not prepared by him/her or under his/her direct supervision. No licensee shall affix his/her seal to any document unless the licensee has assumed the responsibility for the accuracy of the contract documents involved.

B. Seals must meet the following specifications:

1. The seal shall be circular in shape and two (2) inches in diameter;

2. Concentric with the outside of the seal there shall be a circle one and one-half (1 1/2 ) inches in diameter;

3. In the annular space between the circle and the outside of the seal shall be the words "State of South Carolina" on the top and "Licensed Soil Classifier" on the bottom.

4. The name and license number of only one (1) individual shall be placed within the inner circle.

C. Professional soil classifiers licensed before July 1, 2012 may continue to use the previous seal design approved by the council.

Added by State Register Volume 36, Issue No. 6, eff June 22, 2012.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.