South Carolina Code of Regulations
Chapter 103 - PUBLIC SERVICE COMMISSION
Article 4 - GAS SYSTEMS
Subarticle 6 - INSPECTION AND TESTS
Section 103-470 - Utility Inspection and Tests

Universal Citation: SC Code Regs 103-470

Current through Register Vol. 48, No. 9, September 27, 2024

A. Each gas utility shall make such tests as are prescribed under these rules with such frequency and in such manner and at such places as is herein provided, as requested by the ORS or as may be approved or ordered by the commission. Unless otherwise directed by the commission, the methods and apparatus recommended by the National Bureau of Standards in the latest edition of its Circular No. 48, "Standard Methods of Gas Testing" may be used.

B. When the gas itself is to be tested pursuant to these rules, a "cubic foot" shall mean the quantity of gas necessary to fill a cubic foot of space when the gas is at an absolute pressure of 14.73 pounds per square inch and at a temperature of sixty degrees Fahrenheit. For purposes of measurement of gas to a customer a cubic foot of gas shall be taken to be the amount of gas which occupies a volume of one cubic foot under the conditions existing in such customer's meter as and where installed.

Disclaimer: These regulations may not be the most recent version. South Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.