Rhode Island Code of Regulations
Title 510 - Building Code Commission
Chapter 00 - N/A
Subchapter 00 - N/A
Part 20 - RISRC-1 State Rehabilitation Building and Fire Code for Existing Structures
Section 510-RICR-00-00-20.10 - Chapter 10: Accessibility
Universal Citation: 510 RI Code of Rules 00 00 20.10
Current through September 18, 2024
20.10.1
1001.0
General
1001.1 All buildings, with the Exception of
those determined to be historical and so certified under the provisions of
Chapter 9, shall further comply with the standards outlined herein. B
1001.2 All buildings certified as historical
buildings under the provisions Chapter 9 shall also comply with the standards
herein. BO
Exception: Where such modifications to the existing building are determined, by the State Historical Preservation Officer, in writing, to adversely impact the historical significance of the building. In all such cases, the owner shall meet with the State Historical Preservation Officer, the Building Commissioner, and the State ADA Coordinator, or their respective designees, to develop alternative means of compliance with this chapter.
20.10.2
1002.0
Requirements
1002.1 General: Any alteration to a facility
covered by this code, after passage of this code, shall be made so as to ensure
that, to the maximum extent feasible, the altered portions of the facility are
readily accessible to and usable by individuals with disabilities, including
individuals who use wheelchairs. B
1002.2 Alteration: For the purposes of this
chapter, an alteration is a change to a place of public accommodation or a
commercial facility that affects or could affect the usability of the building
or facility or any part thereof. B
1002.3 Alterations include, but are not
limited to, remodeling, renovation, rehabilitation, reconstruction, historical
restoration, changes or rearrangement in structural parts or elements, and
changes or rearrangement in the plan configuration of walls and full-height
partitions. Normal maintenance, re-roofing, painting or wallpapering, asbestos
removal, or changes to mechanical and electrical systems are not alterations
unless they affect the usability of the building or facility. B
1002.4 If existing elements, spaces, or
common areas are altered, then each such altered element, space, or area shall
comply with the applicable provisions of the American with Disabilities Act
Accessibility Guidelines (ADAAG). B
1002.5 To the maximum extent feasible: The
phrase "to the maximum extent feasible", as used in this section, applies to
the occasional case where the nature of an existing facility makes it virtually
impossible to comply fully with applicable accessibility standards through a
planned alteration. In these circumstances, the alteration shall provide the
maximum physical accessibility feasible. Any altered features of the facility
that can be made accessible shall be made accessible. If providing
accessibility in conformance with this section to individuals with certain
disabilities (e.g., those who use wheelchairs) would not be feasible, the
facility shall be made accessible to persons with other types of disabilities
(e.g., those who use crutches, those who have impaired vision or hearing, or
those who have other impairments). B
20.10.3
1003.0
Alterations: Path of
Travel
1003.1 General. An
alteration that affects or could affect the usability of or access to an area
of a facility that contains a primary function shall be made so as to ensure
that, to the maximum extent feasible, the path of travel to the altered area
and the restrooms, telephones, and drinking fountains serving the altered area,
are readily accessible to and usable by individuals with disabilities,
including individuals who use wheelchairs, unless the cost and scope of such
alterations is disproportionate to the cost of the overall alteration.
B
1003.2 Primary function: A
"primary function" is a major activity for which the facility is intended.
Areas that contain a primary function include, but are not limited to, the
customer services lobby of a bank, the dining area of a cafeteria, the meeting
rooms in a conference center, as well as offices and other work areas in which
the activities of the public accommodation or other private entity using the
facility are carried out. Mechanical rooms, boiler rooms, supply storage rooms,
employee lounges or locker rooms, janitorial closets, entrances, corridors, and
restrooms are not areas containing a primary function.
1003.3 Alterations to an area containing a
primary function: Alterations that affect the usability of or access to an area
containing a primary function include, but are not limited to: B
a. Remodeling merchandise display areas or
employee work areas in a department store;
b. Replacing an inaccessible floor surface in
the customer service or employee work areas of a bank;
c. Redesigning the assembly line area of a
factory; or
d. Installing a
computer center in an accounting firm.
1003.4 For the purposes of this section,
alterations to windows, hardware, controls, electrical outlets, and signage
shall not be deemed to be alterations that affect the usability of or access to
an area containing a primary function. B
1003.5 Landlord/tenant: If a tenant is making
alterations as defined in 1002.2 that would trigger the requirements of this
section, those alterations by the tenant in areas that only the tenant occupies
do not trigger a path of travel obligation upon the landlord with respect to
areas of the facility under the landlord's authority, if those areas are not
otherwise being altered. B
1003.6
Path of travel: A "path of travel" includes a continuous, unobstructed way of
pedestrian passage by means of which the altered area may be approached,
entered, and exited, and which connects the altered area with an exterior
approach (including sidewalks, streets, and parking areas), an entrance to the
facility, and other parts of the facility. B
1003.7 An accessible path of travel may
consist of walks and sidewalks, curb ramps and other interior or exterior
pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and
other improved areas; parking access aisles; elevators and lifts; or a
combination of these elements. B
1003.8 For the purposes of this code, the
term "path of travel" also includes the restrooms, telephones, and drinking
fountains serving the altered area. B
1003.9 Disproportionality: Alterations made
to provide an accessible path of travel to the altered area will be deemed
disproportionate to the overall alteration when the cost exceeds twenty (20%)
percent of the cost of the alteration to the primary function area. B
1003.10 Costs that may be counted as
expenditures required to provide an accessible path of travel may include: B
a. Costs associated with providing an
accessible entrance and an accessible route to the altered area, for example,
the cost of widening doorways or installing ramps; B
b. Costs associated with making restrooms
accessible, such as installing grab bars, enlarging toilet stalls, insulating
pipes, or installing accessible faucet controls; B
c. Costs associated with providing accessible
telephones, such as relocating the telephone to an accessible height,
installing amplification devices, or installing a telecommunications device for
deaf persons (TDD); B
d. Costs
associated with relocating an inaccessible drinking fountain. B
1003.11 Duty to provide accessible
features in the event of disproportionality. When the cost of alterations
necessary to make the path of travel to the altered area fully accessible is
disproportionate to the cost of the overall alteration, the path of travel
shall be made accessible to the extent that it can be made accessible without
incurring disproportionate costs. B
1003.12 In choosing which accessible elements
to provide, priority should be given to those elements that will provide the
greatest access, in the following order: B
a.
An accessible entrance;
b. An
accessible route to the altered area;
c. At least one accessible restroom for each
sex or a single unisex restroom;
d.
Accessible telephones;
e.
Accessible drinking fountains; and
f. When possible, additional accessible
elements such as parking, storage, and alarms.
1003.13 Series of smaller alterations: The
obligation to provide an accessible path of travel may not be evaded by
performing a series of small alterations to the area served by a single path of
travel if those alterations could have been performed as a single undertaking.
B
1003.14 If an area containing a
primary function has been altered without providing an accessible path of
travel to that area, and subsequent alterations of that area, or a different
area on the same path of travel, are undertaken within three years of the
original alteration, the total cost of alterations to the primary function
areas on that path of travel during the preceding three year period shall be
considered in determining whether the cost of making that path of travel
accessible is disproportionate. B
1003.15 Only alterations undertaken after the
passage of this chapter shall be considered in determining if the cost of
providing an accessible path of travel is disproportionate to the overall cost
of the alterations. B
20.10.4
1004.0
Alterations: Elevator
Exemption
1004.1 This
section does not require the installation of an elevator in an altered facility
that is less than three stories or has less than 3,000 square feet per story,
except with respect to any facility that houses a shopping center, a shopping
mall, the professional office of a health care provider, a terminal, depot, or
other station used for specified public transportation, or an airport passenger
terminal. B
1004.2 For the purposes
of this section, "professional office of a health care provider" means a
location where a person or entity regulated by a state to provide professional
services related to the physical or mental health of an individual makes such
services available to the public. The facility that houses a "professional
office of a health care provider" only includes floor levels housing by at
least one health care provider, or any floor level designed or intended for use
by at least one health care provider. B
1004.3 For the purposes of this section,
shopping center or shopping mall means: B
a. A
building housing five or more sales or rental establishments; or
b. A series of buildings on a common site,
connected by a common pedestrian access route above or below the ground floor,
that is either under common ownership or common control or developed either as
one project or as a series of related projects, housing five or more sales or
rental establishments. The facility housing a "shopping center or shopping
mall" only includes floor levels housing at least one sales or rental
establishment, or any floor level designed or intended for use by at least one
sales or rental establishment.
1004.4 The exemption provided in 1004.1 does
not obviate or limit in any way the obligation to comply with the other
accessibility requirements established in this subpart. For example,
alterations to floors above or below the accessible ground floor must be
accessible regardless of whether the altered facility has an elevator.
B
20.10.5
1005.0
Removal of
Barriers
1005.1 General: A
facility covered by this code shall remove architectural barriers in existing
facilities, including communication barriers that are structural in nature,
where such removal is readily achievable, i.e., easily accomplishable and able
to be carried out without much difficulty or expense. B
1005.2 Examples: Examples of steps to remove
barriers include, but are not limited to, the following actions: B
a. Installing ramps;
b. Making curb cuts in sidewalks and
entrances;
c. Repositioning
shelves;
d. Rearranging tables,
chairs, vending machines, display racks, and other furniture;
e. Repositioning telephones;
f. Adding raised markings on elevator control
buttons;
g. Installing flashing
alarm lights;
h. Widening
doors;
i. Installing offset hinges
to widen doorways;
j. Eliminating a
turnstile or providing an alternative accessible path;
k. Installing accessible door
hardware;
l. Installing grab bars
in toilet stalls;
m. Rearranging
toilet partitions to increase maneuvering space;
n. Insulating lavatory pipes under sinks to
prevent burns;
o. Installing a
raised toilet seat;
p. Installing a
full-length bathroom mirror;
q.
Repositioning the paper towel dispenser in a bathroom;
r. Creating designated accessible parking
spaces;
s. Installing an accessible
paper cup dispenser at an existing inaccessible water fountain;
t. Removing high pile, low density
carpeting.
1005.3
Priorities: A public accommodation is urged to take measures to comply with the
barrier removal requirements of this section in accordance with the following
order of priorities. B
1005.3.1 First, a
public accommodation should take measures to provide access to a place of
public accommodation from public sidewalks, parking or public transportation.
These measures include, for example, installing an entrance ramp, widening
entrances, and providing accessible parking spaces. B
1005.3.2 Second, a public accommodation
should take measures to provide access to those areas of a place of public
accommodation where goods and services are made available to the public. These
measures include, for example, adjusting the layout of display racks,
rearranging tables, providing Brailed and other raised character signage,
widening doors, providing visual alarms, and installing ramps. B
1005.3.3 Third, a public accommodation should
take measures to provide access to restroom facilities. These measures include,
for example, removal of obstructing furniture or vending machines, widening of
doors, installation of ramps, providing accessible signage, widening of toilet
stalls, and installation of grab bars. B
1005.3.4 Fourth, a public accommodation
should take any other measures necessary to provide access to the goods,
services, facilities, privileges, advantages, or accommodations of a place of
public accommodation. B
1005.4 Relationship to alterations
requirements of 1003.
1005.4.1 Except as
provided in 1004.2, measures taken to comply with the barrier removal
requirements of this section shall comply with the applicable requirements for
alterations in 1002 and 1004 for the element being altered. The path of travel
requirements of 1003 shall not apply to measures taken solely to comply with
the barrier removal requirements of this section. B
1005.4.2 If, as a result of compliance with
the alterations requirements specified in 1005.4.1 the measures required to
remove a barrier would not be readily achievable, a public accommodation may
take other readily achievable measures to remove the barrier that do not fully
comply with the specified requirements. Such measures include, for example,
providing a ramp with a steeper slope or widening a doorway to a narrower width
than that mandated by the alterations requirements. No measure shall be taken,
however, that poses a significant risk to the health or safety of individuals
with disabilities or others. B
1005.5 Portable ramps. Portable ramps should
be used to comply with this section only when installation of a permanent ramp
is not readily achievable. In order to avoid any significant risk to the health
or safety of individuals with disabilities or others in using portable ramps,
due consideration shall be given to safety features such as non-slip surfaces,
railings, anchoring, and strength of materials. B
1005.6 Selling or serving space. The
rearrangement of temporary or movable structures, such as furniture, equipment,
and display racks is not readily achievable to the extent that it results in a
significant loss of selling or serving space. B
1005.7 Limitation on barrier removal
obligations.
1005.7.1 The requirements for
barrier removal under 1005 shall not be interpreted to exceed the standards for
alterations in ADAAG. B
1005.7.2 To
the extent that relevant standards for alterations are not provided 1005, then
the requirements of Chapter 10 shall not be interpreted to exceed the standards
for new construction in ADAAG. B
NOTE: Where the section is followed by the letter "B", "F", or "O", the following meaning shall apply:
"B" This means that the Building Official or the Plumbing, Mechanical or Electrical Inspector shall review the plans, issue the permit, inspect the installation, and approve the final certificate.
"F" This means that the Fire Official shall review the plans for approval, the Fire Official and/or the Building Official inspects the installation, and the Fire Official observes the final test and approves the final installation. The Building Official shall issue the permits.
"O" This would indicate another State agency approval and inspection is needed. An explanation will indicate the agency and approvals needed.
Disclaimer: These regulations may not be the most recent version. Rhode Island may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
