Rhode Island Code of Regulations
Title 510 - Building Code Commission
Chapter 00 - N/A
Subchapter 00 - N/A
Part 2 - RISBC-2 Rhode Island State One amp; Two-Family Dwelling Code
Section 510-RICR-00-00-2.10 - Chapter 8
Universal Citation: 510 RI Code of Rules 00 00 2.10
Current through September 18, 2024
R802.6 Bearing. The ends of each rafter or ceiling joist shall have not less than one and one half inches (1 1/2") (38 mm) of bearing on wood or metal and not less than three inches (3") (76 mm) on masonry or concrete.
R802.11.1.3 Delete and
substitute the following:
R802.11.1.3 Rafters:
Rafters shall have ties at the wall plate and ridge bearing points in accordance with Appendix AA
R807.1 Add the words "or closet" after the word "hallway" on line 3 paragraph 2.
Disclaimer: These regulations may not be the most recent version. Rhode Island may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
