Pennsylvania Code
Title 67 - TRANSPORTATION
Part I - Department of Transportation
Subpart A - Vehicle Code Provisions
Article VII - Vehicle Characteristics
Chapter 183 - HOLD-DOWN AND TIEDOWN DEVICES FOR METAL CARGO AND LOGS
Section 183.1 - Application

Universal Citation: 67 PA Code ยง 183.1

Current through Register Vol. 54, No. 44, November 2, 2024

The requirements of this chapter is the responsibility of the carrier and is applicable to the transportation of cargo of the following types:

(1) Sheet and strip in coils, coated and uncoated and tin mill products in coils, when the weight of either an individual article or group of articles bound together so as to be handled as one article exceeds 5,000 pounds.

(2) Tin mill products in ingots and pipes, when the weight of either an individual article or group of articles bound together so as to be handled as one article exceeds 2,000 pounds.

(3) Logs.

This section cited in 67 Pa. Code § 183.2 (relating to definitions); and 67 Pa. Code § 183.4 (relating to basic protection components).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.