Pennsylvania Code
Title 67 - TRANSPORTATION
Part I - Department of Transportation
Subpart A - Vehicle Code Provisions
Article VII - Vehicle Characteristics
Chapter 175 - VEHICLE EQUIPMENT AND INSPECTION
Subchapter K - STREET RODS, SPECIALLY CONSTRUCTED AND RECONSTRUCTED VEHICLES
Section 175.208 - Body
Current through Register Vol. 54, No. 44, November 2, 2024
(a) Condition of body. All items on the body shall be in safe operating condition as described in §§ 175.80, 175.110, 175.130, 175.160, 175.190 and 175.220 (relating to inspection procedure) and this subchapter.
(b) Fenders. A vehicle specified under this subchapter shall have fenders on all wheels which cover the entire tread width of a tire that comes in contact with the road surface. The tire tread circumference coverage shall be from at least 15 degrees front to at least 75 degrees rear of the vertical centerline at each wheel, measured from the center of wheel rotation. Vehicles registered as street rods are exempt from the requirements regarding fenders.
(c) Hood-street rods only. A street rod is not required to have a hood which covers the top of the entire engine compartment. If the hood top or sides, or both, are removed from the vehicle, the engine fan must be enclosed with a shroud designed to protect the fan from accidental contact from the outside.
(d) Doors. A door shall be installed for any location from which a refuse truck is to be operated. If the vehicle is equipped with dual controls, a door shall be installed at each control position.
The provisions of this §175.208 amended under the Vehicle Code, 75 Pa.C.S. §§ 4103, 4301, 4501, 4521 and 6103.