Pennsylvania Code
Title 67 - TRANSPORTATION
Part I - Department of Transportation
Subpart A - Vehicle Code Provisions
Article VII - Vehicle Characteristics
Chapter 171 - SCHOOL BUSES AND SCHOOL VEHICLES
Subchapter C - SCHOOL BUS BODY STANDARDS
Section 171.58 - Interior
Current through Register Vol. 54, No. 44, November 2, 2024
The requirements for the interior of school buses are as follows:
(1) The interior of every school bus shall be free of unnecessary projections likely to cause injury. This standard requires inner lining on ceilings and walls. If the ceiling is constructed so as to contain lapped joints, the forward panel shall be lapped by the rear panel, and exposed edges shall be beaded, hemmed, flanged or otherwise treated to minimize sharp edges.
(2) Every school bus shall meet the requirements of FMVSS No. 302, as to the flammability of interior materials. See Appendix A.
(3) Book racks or luggage racks are not permitted.
(4) Interior radio/stereo speakers shall be of the flush mounted type. Exposed parts shall be treated to minimize sharp edges.
(5) The driver's area forward of the foremost padded barriers shall permit the mounting of required safety equipment and vehicle operating equipment.
(6) The requirements for air-conditioning units are as follows:
The provisions of this §171.58 amended under the Vehicle Code, 75 Pa.C.S. §§ 4103, 4551-4553 and 6103.