Current through Register Vol. 54, No. 44, November 2, 2024
(a) A system
must automatically detect vehicles exceeding the posted speed limit with a type
of speed timing device and produce a recorded image that shows:
(1) a clear and legible identification of
only the vehicle's license plate;
(2) location; and
(3) date and time.
(b) Each speed timing device used in a system
must be approved by the Department under
75 Pa.C.S. §
3368
(relating to speed timing devices). Approval under
75 Pa.C.S. §
3368
shall mean that the speed timing device used in a system has been published by
the Department in the Pennsylvania Bulletin as meeting the
following:
(1) The speed timing device is
listed on the current Conforming Product List maintained by the National
Highway Traffic Safety Administration, which is available at
https://www.nhtsa.gov/sites/nhtsa.dot.gov/files/documents/combined[lowbar]cpl[lowbar]august[lowbar]15[lowbar]2018[lowbar]portrait[lowbar]format.pdf,
as such speed timing devices meet or exceed current technical specifications of
the National Highway Traffic Safety Administration; or
(2) The speed timing device is tested and
approved by an independent third party as capable of meeting the calibration
standards of 67 Pa. Code §
105a.4 (relating to system and
speed timing device use and certification) or the current technical
specifications of the National Highway Traffic Safety Administration. These
specifications for speed timing devices are available, as follows:
(i) Speed-Measuring Device Specifications:
Down-the-Road RADAR Module, available at
https://www.nhtsa.gov/sites/nhtsa.dot.gov/files/812266-downroadradarmodule.pdf.
(ii) Speed-Measuring Device Performance
Specifications: Across-the-Road Radar Module, available at
https://www.nhtsa.gov/DOT/NHTSA/Traffic%20Injury%20Control/Articles/Associated%20Files/810845.pdf.
(iii) LIDAR Speed-Measuring Device
Performance Specifications, available at
https://www.nhtsa.gov/sites/nhtsa.dot.gov/files/documents/809811lidarspeedmeasuringdevice.pdf.
This section cited in 67 Pa. Code §
105a.4 (relating to system and
speed timing device use and
certification).
