Pennsylvania Code
Title 67 - TRANSPORTATION
Part I - Department of Transportation
Subpart A - Vehicle Code Provisions
Article VI - Operation of Vehicles
Chapter 105 - MECHANICAL, ELECTRICAL AND ELECTRONIC SPEED-TIMING DEVICES
Subchapter F - ELECTRONIC DEVICES (NONRADAR) WHICH CALCULATE AVERAGE SPEED BETWEEN ANY TWO POINTS
Section 105.93 - Operation of maintenance and calibration stations

(a) Maintenance and calibration. Maintenance and calibration of electronic devices governed by this subchapter shall be provided, as necessary, upon request by State or local police.

(b) Hours. Stations for the maintenance and calibration of electronic devices shall be operated during a regular work week, Monday through Friday during the hours of 8 a.m. to 5 p.m.

(c) Personnel. A station for the maintenance and calibration of electronic devices shall employ on a full-time basis:

(d) Certification of accuracy. Either the electrical engineer, associate engineer, metrologist, associate metrologist or technician shall be present at the time that the testing is conducted. The certification that the electronic speed-timing device has been tested and found to be accurate creates a presumption that the requirements of this subsection have been fulfilled.

(e) Malfunctioning devices. Malfunctioning electronic devices shall be returned to the manufacturer or to a service center approved by the manufacturer and tagged with the date tested, the serial number of the device and a notation of the general condition of the device.

(f) Damage to or loss of device. The station for the maintenance and calibration of electronic devices is responsible for damages or losses of the devices while they are being serviced or calibrated.

(g) Location. Electronic testing and repair shall take place at an approved electronic testing station, except that, upon approval of the Department, an electronic testing station may operate mobile test units of a type approved by the Department.