Pennsylvania Code
Title 67 - TRANSPORTATION
Part I - Department of Transportation
Subpart A - Vehicle Code Provisions
Article VI - Operation of Vehicles
Chapter 105 - MECHANICAL, ELECTRICAL AND ELECTRONIC SPEED-TIMING DEVICES
Subchapter B - ELECTRONIC DEVICES (RADAR)
Section 105.13 - Operation of maintenance and calibration stations
Current through Register Vol. 54, No. 44, November 2, 2024
(a) Maintenance and calibration. Maintenance and calibration of electronic devices shall be provided, as necessary, upon notice by the State Police.
(b) Hours. Stations for the maintenance and calibration of electronic devices shall be operated during a regular work week Monday through Friday during the hours of 8 a.m. to 5 p.m.
(c) Personnel. Every station for the maintenance and calibration of electronic devices shall employ on a full time basis:
(d) Presumption of accuracy. Either the electrical engineer, associate engineer or technician shall be present at the time that the test is conducted. The certification that the electronic speed-timing device has been tested and found to be accurate shall create a presumption that the requirements of this subsection have been fulfilled. Adjustments and repairs shall be made in conformance with 47 CFR 90.433 (relating to operator requirements).
(e) [Reserved].
(f) Damage to or loss of device. The station for the maintenance and calibration of electronic devices is responsible for damages or losses of electronic devices while they are being serviced or calibrated.
This section cited in 67 Pa. Code § 105a.4 (relating to system and speed timing device use and certification).