Pennsylvania Code
Title 49 - PROFESSIONAL AND VOCATIONAL STANDARDS
Part I - DEPARTMENT OF STATE
Subpart A - PROFESSIONAL AND OCCUPATIONAL AFFAIRS
Chapter 9 - STATE ARCHITECTS LICENSURE BOARD
ARCHITECT'S SEAL OF LICENSURE
Section 9.143 - Design
Current through Register Vol. 54, No. 44, November 2, 2024
(a) A licensee may not design his own seal or stamp except as provided in this chapter.
(b) A seal or stamp combining the names of a number of architects in a firm may be used in lieu of individual seals or stamps, if the names of the individual licensees, their license numbers and the legend "Architects" appear on the combined seal or stamp, and the members of the firm are licensed to practice architecture in this Commonwealth. If one or more members of the firm are not licensed by the Board, the individual architect who is professionally responsible for the work of the firm in this Commonwealth is required to use his individual seal or stamp on that work.
(c) A reproduction of a stamp identical to the prescribed stamp may be used.
(d) This section does not relieve an individual architect whose name appears on the combined seal or stamp of a responsibility mandated in the act and this chapter.
The provisions of this §9.143 amended under sections 5(a), 6(a)-(d), 8(b) and (c), 10(b), 11(a), 12(a) and (c), 13(h) and 14 of the Architects Licensure Law (63 P. S. §§ 34.5(a), 34.6(a)-(d), 34.8(b) and (c), 34.10(b), 34.11(a), 34.12(a) and (c), 34.13(h) and 34.14).
This section cited in 49 Pa. Code § 9.151 (relating to standards of professional conduct).
