Pennsylvania Code
Title 49 - PROFESSIONAL AND VOCATIONAL STANDARDS
Part I - DEPARTMENT OF STATE
Subpart A - PROFESSIONAL AND OCCUPATIONAL AFFAIRS
Chapter 37 - STATE REGISTRATION BOARD FOR PROFESSIONAL ENGINEERS, LAND SURVEYORS AND GEOLOGISTS
REGISTERED PROFESSIONAL ENGINEERS
Section 37.33 - Grandfather requirements for certification as an engineer-in-training and for licensure as a professional engineer
Current through Register Vol. 54, No. 12, March 23, 2024
(a) Scope. This section applies to a candidate for certification as an engineer-in-training and subsequent licensure as a professional engineer who received a qualifying academic degree before June 30, 1994, or who began acquiring qualifying experience before February 19, 1991.
(b) Engineer-in-training. A candidate for certification as an engineer-in-training under this subsection shall be of good moral character and achieve a passing score on the NCEES fundamentals of engineering examination, except that completion of the fundamentals of engineering examination is not required of a candidate who received a qualifying academic degree before January 1, 1968. To qualify for the fundamentals of engineering examination, the candidate shall possess one of the following qualifications:
(c) Professional engineer. A candidate for licensure as a professional engineer under this subsection shall be of good moral character and achieve a passing score on the NCEES principles and practice examination in one of the branches of engineering.
The provisions of this § 37.33 amended under sections 4(b) and (l), 4.2, 4.3 and 4.4 of the Engineer, Land Surveyor and Geologist Registration Law (63 P. S. §§ 151(b) and (l), 151.2, 151.3 and 151.4).
This section cited in 49 Pa. Code § 37.20 (relating to licensure by endorsement); and 49 Pa. Code § 37.31 (relating to requirements for certification as an engineer-in-training and for licensure as a professional engineer).