Pennsylvania Code
Title 49 - PROFESSIONAL AND VOCATIONAL STANDARDS
Part I - DEPARTMENT OF STATE
Subpart A - PROFESSIONAL AND OCCUPATIONAL AFFAIRS
Chapter 15 - STATE BOARD OF LANDSCAPE ARCHITECTS
ADMINISTRATION
Section 15.33 - Seals
Current through Register Vol. 54, No. 44, November 2, 2024
(a) An approved seal or stamp will be required for a registrant for the purpose of signing and sealing drawings, preliminary documents, specifications and contract documents or other work product.
(b) Only one registered landscape architect's name may be used per seal. However, more than one seal or stamp may appear on drawings, specifications and documents or other work product.
(c) A registrant shall be required to obtain the authorized seal or a rubber stamp, bearing the registrant's name and registration number and the legend "Registered Landscape Architect" together with a reference to Pennsylvania. A digital seal or rubber stamp identical to the prescribed seal may be obtained and used in lieu of, or in conjunction with, a metal seal.
A sample seal is as follows:
(d) A licensee who fails to obtain a seal or rubber stamp will be subject to disciplinary action and penalties under section 11(b) of the act (63 P.S. § 911(b)).
(e) When a registrant seals and signs landscape architectural drawings, reports, documents and other work product, one of the following methods must be used:
The provisions of this §15.33 amended under section 812.1 of The Administrative Code of 1929 (71 P.S. § 279.3a); and sections 4(9) and 9 of the Landscape Architects' Registration Law (63 P.S. §§ 904(9) and 909).
This section cited in 49 Pa. Code § 15.32a (relating to definitions).
