Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 9 - EMPLOYMENT AND WAGES
Subchapter D - MISCELLANEOUS HAZARDS AND CONDITIONS OF EMPLOYMENT
Section 9.80 - Forging and hot metal stamping
Universal Citation: 34 PA Code ยง 9.80
Current through Register Vol. 54, No. 38, September 21, 2024
(a) All hammers operated by steam, air, gravity or electricity shall be provided with positive locking devices so that when the ram is at the top or the bottom of its stroke, it cannot be accidentally moved.
(b) Every steam and air hammer shall be provided with a stop valve in the admission pipe line, which shall be closed, prior to, and during the repair of the hammer or while changing dies.
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
