Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 7 - ELEVATORS, LIFTS, ESCALATORS, DUMBWAITERS, HOISTS ANDTRAMWAYS
Subchapter F - POWER-OPERATED SPECIAL INDUSTRIAL SERVICE ELEVATORS
SPECIFICATIONS
Section 7.184 - Overload support

Universal Citation: 34 PA Code ยง 7.184

Current through Register Vol. 54, No. 38, September 21, 2024

(a) All machinery and sheaves shall be so supported and secured as to effectually prevent any part becoming loose or displaced. The supporting beams shall be composed of steel, sound timber, or reinforced concrete.

(b) In computing the loads on overhead beams and their supports, the total load on overhead beams shall be assumed to be equal to the weight of all apparatus resting on the beams plus twice the maximum load suspended from the beams. The object in doubling the suspended load is to allow for impact, acceleration, stresses, and the like. The load resting on the beams shall include the complete weights of the machine, sheaves, controller, and the like. The load suspended from the beams shall include the sum of the tensions of all cables suspended from the beams.

(c) No elevator machinery or sheaves shall be fastened to the underside of the supporting beams at the top of the hoistway, except the idler or deflecting sheaves with their guards and frames. Supporting members for sheaves and other elevator machinery hung underneath beams shall not be of cast iron in tension.

(d) The factor of safety for overhead beams and their supports shall be five for steel and six for timber and reinforced concrete.

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.