Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 47 - MISCELLANEOUS PROVISIONS
Subchapter J - WINDOW CLEANING
GENERAL PROVISIONS
Section 47.376 - Terminals

Universal Citation: 34 PA Code ยง 47.376

Current through Register Vol. 54, No. 38, September 21, 2024

(a) The ends of the belt shall be fitted with approved heavy forged or cast metal safety terminals of brass, or other approved durable corrosive-resistive materials. If cast they shall be properly annealed.

(b) Safety belt terminals shall have slots not less than 4 inches long. The slots shall be 1/2 inch wide and that portion of the slot which passes over the anchor head shall be 7/16 inch deep by 1 inch wide and shall have an approved catch to prevent the automatic or accidental release of the terminal.

(c) Right angle sections of terminals shall have 1/8 inch radius fillets in all inside corners.

(d) All other metal parts, fittings, rivets and thimbles shall be of the same strength and specifications as the safety terminals.

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.