Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 47 - MISCELLANEOUS PROVISIONS
Subchapter A - BEDDING AND UPHOLSTERY
LABELING
Section 47.22 - Specifications for tags

Universal Citation: 34 PA Code ยง 47.22

Current through Register Vol. 54, No. 44, November 2, 2024

(a) Tags shall be of good grade cloth which does not flake when abraded. Paper faced tags shall not be used.

(b) Vinyl tags may be approved when a heat-sealing process is used in the fabrication of vinyl covered articles.

(c) Tags shall not be less than 6 inches in area.

(d) Only the statement required by this subchapter shall appear on the tag. No advertisement or superfluous wordings are permitted. All matters may be placed on another tag and attached to the article in a manner so that it does not interfere with or contradict the statements on it. The official tag shall not be defaced in any manner.

(e) The kind of filling material used shall be stamped or printed on the tag in bold face type not less than 1/8 inch in height.

(f) Not withstanding anything to the contrary contained in this section, labels on the bottom of slip seat chairs, vanity benches, padded stools and like articles having a smooth bottom, may be of cardboard printed on a white background.

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.