Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 45 - WOODWORKING AND RELATED OPERATIONS
SPECIAL REQUIREMENTS FOR NEW INSTALLATIONS
Section 45.128 - Tenoning machines
Universal Citation: 34 PA Code ยง 45.128
Current through Register Vol. 54, No. 38, September 21, 2024
If sheet metal is used for guards on cutting heads, saws and exposed moving parts, it shall be not less than 1/8 inch (approximately 11 gauge) in thickness. If cast metal guards are used, the thickness shall be not less than 3/16 inch for cast iron and 5/8 inch for aluminum. The hood of the exhaust system may form part or all of the guard. When so used, the hood shall be constructed of metal of a thickness not less than that specified in this section.
This section cited in 34 Pa. Code § 45.147 (relating to tenoning machines).
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
