Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 45 - WOODWORKING AND RELATED OPERATIONS
SPECIAL REQUIREMENTS FOR NEW INSTALLATIONS
Section 45.125 - Circular crosscut saws

Universal Citation: 34 PA Code ยง 45.125
Current through Register Vol. 54, No. 38, September 21, 2024

Each circular crosscut table saw shall be guarded by an approved hood which shall cover the saw at all times at least to the depth of the teeth. The hood shall adjust itself automatically to the thickness of, and shall remain in contact with, the material being cut, unless finished surfaces of stock may be marred by contact with the guard, in which case the guard may be raised slightly to avoid contact. The hood shall be designed so as to protect the operator from flying splinters and broken saw teeth.

This section cited in 34 Pa. Code § 45.82 (relating to exceptions and special applications); and 34 Pa. Code § 45.146 (relating to hoods for woodworking machinery).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.